Sledtrack

Camoplast - Camso 9190H Ice Attak XT Snowmobile Track Video Review The Camoplast 9190H Ice Attak XT snowmobile track is 120 inches in length by 15 inches wide with a 1.220 inch lug height. It features the Ice Control Enhancement Technology (ICE Tech) and comes prestudded with 224 studs built right into the lugs of the track. Its optimized rubber compound increases lug rigidity for super traction on groomed trails. It has 1 ply construction with a 2.86 inch pitch. Since this t...rack has a taller lug height, you'll need to make sure your sled has enough clearance so you do not run into any fitment issues. Learn More At https://sledtrack.com//camso-9190h-ice-attak-xt-snowmobil/ Need help - ready to buy? Visit the link above or call the store at 607-693-1031 M-F 10am to 4pm EST and ask for Ken.

The Camso Back Country X series of snowmobile tracks are designed provide excellent traction for crossover riders who prefer off-trail riding. Sno X inspired lug design bites big in deep, soft, untraveled snow. Rigid lug support columns and optimized rubber compound are ideal for off and on-trail performance. Available in 5 sizes which are 153 inches in length by 15 inches wide, lug height 1.75 inches, 3 inch pitch... 141 inches in length by 15 inches wide, lug height is 1.75 inches, 3 inch pitch 137 inches in length by 15 inches wide, lug height is 1.75 inches, 2.86 pitch 120 inches in length by 15 inches wide, lug height is 1.75 inches, 2.86 pitch 129 inches in length by 15 inches wide, lug height is 1.75 inches, 2.86 pitch Learn More At https://sledtrack.com//camso-back-country-snowmobile-trac/ Have questions? Ready to order? Then reach out to us at 607-693-1031 M-F 10am to 4pm EST or visit our website Sledtrack.com where you can order online.

The Camso 9216H Ripsaw 2 snowmobile track is designed to provide less side bite when cornering, excellent bite on hard pack snow, improved traction on loose, and improved rider comfort on hard packed groomed trails. The technical specifications of the 9216H are: * 136 inches in length by 15 inches wide... * The lug or tread height is 1.25 inches * Weight is approximately 45 pounds * Fully clipped * Pitch is 2.52 * 2 ply construction * Camso Camoplast SKU: 9216H Learn more and buy at https://sledtrack.com//camso-9216h-ripsaw-ii-snowmobile-t/ If you have any questions or are ready to order you can visit our website sledtrack.com or give us a call at 607-693-1031 M-F 10am to 4pm EST and we'll be glad to help you out.

Camso 9968H96 Ripsaw Snowmobile Track and 96 Woodys Traction Master Studs Combo Kit https://sledtrack.com//camso-9968h96-snowmobile-track-and/ This video reviews the Camso - Camoplast 9968H96 Ripsaw snowmobile track and Woodys Traction Master stud kit. The track together with the stud kit will give you a prestudded snowmobile track that provides aggressive traction.... The 9968H96 Ripsaw is a predrilled snowmobile track which can be used with or without studs. It has a length of 121 inches, a width of 15 inches and a lug height of 1.25 inches. It features the Ripsaw tread pattern. And it comes predrilled with 96 holes in the center. The Woodys Traction Master Stud kit consists of 96 Woodys Traction Master 60 degree 1.325 Snowmobile Studs, 96 Woodys Square Aluminum Plates and 96 Woodys Nuts. The combination of the 9968H96 Ripsaw and Woodys Traction master studs will give you a track that provides excellent performance with aggressive traction. Installation is easy, you just need a few tools. You need a ratchet with a 13 mm socket, 4 mm hex key wrench or 4mm socket with another ratchet. Push the stud through the inside of the track, there are holes premolded in the track. Push the stud in. Put your backer on perpendicular to your traction bar. Put your nut on. You should have a torque wrench. Woodys recommends torquing the nut to 15 foot pounds for the 2 ply track which is what the 9968H96 is. Do not over tighten the nuts as you will strip them. This allows you optimum penetration without a lot of mass. Always remember, you need to make sure the track will fit your sled and that you have the clearance between the track and tunnel protectors. Woodys always recommends you use tunnel protectors and double check your clearance to make sure that these studs will clear so that you do not cause damage to your sled. We only sell the Woodys studs due to the quality and the way they are measured. If you need more information call us at 607-693-1031 M-F 10am to 4pm EST or contact us by email using our contact form https://sledtrack.com/contact-us/

Snowmobile trail tracks are designed for those that spend the majority of their time on groomed or hard packed snowmobile trails. Lug height or tread height for these tracks will range from approximately 3/4 of an inch to 1 and 1 1/4 inches in height. There is a wide variety of tracks designed for trail use. Some are ideal for the casual rider to those seeking high performance. Some of these tracks are available in prestudded version. Learn more at https://sledtrack.com//snowmobile/trail-snowmobile-tracks/

The Camso Camoplast Intense series of snowmobile tracks are on and off trail use. If you're a rider who spends time on and off trail, then the Intense line of snowmobile tracks is something you should consider. * 1.5 inch lugs provide aggressive traction for crossover riders * Saw-tooth lug design for excellent handling, acceleration and braking on groomed hard-packed trails * V-shaped and full lugs provide extra traction in soft, loose snow... * Available in two sizes - 121 x 15 x 1.5" Part number 9930C - 136 x 15 x 1.5" Part number 9108C Learn more at https://sledtrack.com//ca/camso-intense-snowmobile-tracks/ If you have any questions or if you are ready to order you can visit our website sledtrack.com or give us a call at 607-693-1031 M-F 10am to 4pm EST and we'll be glad to help you out.